sales@gninstruments.com

Type:CX-ICM-1101A industrial conductivity meter

Illustrate:It is applicable for pure and ultrapure water treatment, industrial and sewage water treatment in the following industries: electric power, environmental protection, chemical industry, petroleum, paper making, metallurgy, semi-conductor, medicine, foodstuff, etc

CX-ICM-1101A industrial conductivity meter

Brief Introduction
1.It is a kind of on-line monitoring instrument for water quality analysis equipped with a microprocessor.
2.Widely used for continuous monitoring of the conductivities of demineralized water, raw water, steam condensate, distilled sea water and de-ionized water.
 
Main Features
1.Large vacuum fluorescent display (VFD), and man-machine interaction function.
2.The functions of automatic temperature compensation and automatic range-switching.
3.Available with history curve, real-time trend chart and clock.
4.There are four kinds of built-in recorders. It has the functions of isolated current output and alarm.
5.The user can set the password or consult the “Help” menu or the “Service Guide” Menu.
6.It has power-off protection. The data can be saved for 5 years under a continuous power-failure condition.
7.The communication interface can be connected directly to a computer and enables remote operation and control.
8.The instrument adopts universal module power supply.
9.It is equipped with rib-type, plug-in and push-in types of conductivity electrode with a electrode constant of
K=0.01, K=0.1 or K=1.0.
10.It adopts titanium electrode that can withstand oxidization and erosion and can be easily used and maintained.
 
Main Parameters

Measuring range 0~ 20 μS.cm-1 ,0~200 μS.cm-1, 0~2000μS.cm-1, 0~20mS.cm-1
Automatic temperature compensation 0-60℃ (with 25℃ as the reference temperature)
Intrinsic error Conductivity:±0.5%F.S±1 unit
Error of the temperature compensation ±0.5%F.S
Stability ±0.2/F.S±1 unit/24h
Repeatability error ≤0.2%F.S±1 unit
Output current error ±1%F.S
Alarm error of the electronic units ±2%F.S
Water sample pressure 0.6MPa
Intrinsic error of the instrument: conductivity ±1%F.S, temperature: ±0.5℃
Maximum output load and error For 0~10mA, the maximum output load is l.5K Ω±1%F.S.
For 4~20mA, the maximum output load is 750Ω±1%F.S.
Power supply 85~265VAC 50±1Hz
Overall dimension 151 (length) x 151 (width) x 251 (height) mm
Dimension of the mounting hole 138 x 138mm
Connection pattern of inlet/ outlet water pipes Φ6,Φ8,Φl0,Φl2 and Φ14.
Weight 1.2kg
sensor types and installation methods Flow-through type,duct-type,immersed type

Last:Without the Next:CX-ICM-1101 industrial conducti..

Contact Us

Office Address: Room 402, No. 650, Xinzhuan Rd., Jiuting Town, Songjiang District, Shanghai, China (Mainland)

Phone:021-57635022

E-mail:info@gnflowmeter.com

E-mail:sales@gninstruments.com

关闭