Location -> News
News
KCB55 Gear Pump for Shampoo: A Complete Selection Guide
In the personal care manufacturing industry, selecting the right pump for transferring viscous products like shampoo is critical to production efficiency and product quality. A recent customer inquiry has highlighted the importance of proper pump selection – and the technical considerations that can make or break a successful application.
The Customer Requirement
A customer approached us with the following application requirements:
-
Application: Shampoo transfer
-
Pump type: Gear pump
-
Viscosity: 1,000-4,000 cP
-
Flow rate: 650-1,600 L/H
-
Power supply: 220V 50Hz, 1.5kW
-
Quantity: 1 unit
Based on the customer's reference photo, our technical team quickly identified the pump model as the KCB55 gear pump – a popular choice for medium-flow viscous fluid transfer applications.
Why KCB55 Gear Pump
The KCB55 is a positive displacement gear pump with the following standard specifications:
| Parameter | Value |
|---|---|
| Flow rate | 55 L/min (3.3 m³/h) |
| Discharge pressure | 0.33 MPa |
| Power | 1.5 kW |
| Speed | 1,400 rpm |
| Inlet/Outlet | DN25 (1 inch) |
| Viscosity range | Up to 2,000 cP |
The KCB series pumps are widely used for transferring lubricating oils, chemical liquids, and high-viscosity fluids without solid particles. Their self-priming capability and stable flow output make them ideal for continuous transfer operations in cosmetics, chemical, and food processing plants.
Key Technical Challenges for Shampoo Pumping
Shampoo is not a standard fluid. Its unique rheological properties – typically shear-thinning and exhibiting viscosities ranging from 800 to 3,000 cP depending on formulation – pose specific challenges for pump selection.
Viscosity Range
The customer specified a viscosity range of 1,000-4,000 cP. While the KCB55 standard configuration handles up to 2,000 cP, viscosities above this threshold require adjustments to pump speed or alternative sealing solutions.
Material Compatibility
Shampoo often contains surfactants, fragrances, and preservatives that can be corrosive to standard cast iron pump bodies. For long-term reliability and hygiene compliance, 304 stainless steel construction is recommended.
Temperature Sensitivity
Viscosity is temperature-dependent. Most shampoos are pumped at 20-40°C. At higher temperatures, viscosity drops, reducing pump load and power consumption.
Our Technical Recommendations
Based on our analysis, we recommend the following configuration for the KCB55 gear pump:
304 Stainless Steel Construction
Standard KCB pumps are typically cast iron. For shampoo applications, upgrading to 304 stainless steel ensures:
-
Corrosion resistance against chemical ingredients
-
Hygiene compliance for personal care products
-
Longer service life and reduced maintenance
Variable Frequency Drive (VFD)
A VFD-controlled motor offers several advantages:
-
Adjustable flow rate between 650-1,600 L/H
-
Reduced mechanical stress at higher viscosities
-
Energy savings at partial load operation
-
Soft start to prevent pump damage
Mechanical Seal Selection
For shampoo applications, we recommend a mechanical seal with silicon carbide faces and EPDM or FKM elastomers for optimal chemical compatibility and leakage prevention.
Power Supply Clarification
The customer specified "220V 50Hz 1.5kW" with a note "2". We require confirmation on whether this is:
-
220V single-phase – suitable for small-scale or laboratory operations
-
380V three-phase – standard industrial power, more efficient and reliable for continuous operation
Most KCB55 pumps come standard with three-phase motors. If single-phase is required, a custom motor configuration will be necessary.
Flow Rate Verification
The customer requires 650-1,600 L/H. The KCB55 standard flow rate is 3,300 L/H at 1,400 rpm. To achieve the lower flow range, speed reduction via VFD is essential. At reduced speeds, the pump can operate at 650-1,600 L/H while maintaining stable output – making the KCB55 an excellent match for this application.
How to Confirm Your Pump Selection
To ensure the KCB55 gear pump perfectly matches your shampoo transfer application, please provide the following information:
-
Actual operating viscosity – measure at your pumping temperature
-
Required discharge pressure – if known
-
Power supply type – 220V single-phase or 380V three-phase
-
Site conditions – ambient temperature, installation environment
Customization Options Available
CIXIFM offers a wide range of customization options for the KCB55 gear pump:
-
Materials: Cast iron, 304 stainless steel, 316 stainless steel
-
Seals: Packing seal, mechanical seal, magnetic drive
-
Motors: Standard, explosion-proof, variable frequency, high-efficiency
-
Voltage: Single-phase, three-phase, customized for global markets
-
Connections: Flange, threaded, clamp (hygienic)
Industries Served
The KCB55 gear pump is widely used across multiple industries:
| Industry | Application |
|---|---|
| Cosmetics | Shampoo, conditioner, lotion, cream transfer |
| Chemical | Resins, adhesives, solvents, additives |
| Food | Syrups, oils, chocolate, sauces |
| Pharmaceutical | Liquid medicines, syrups, suspensions |
| Printing | Inks, coatings, adhesives |
Why Choose CIXIFM
-
Industry Expertise – Years of experience in precision fluid handling
-
Technical Support – Professional pump sizing and selection assistance
-
Custom Manufacturing – Tailored solutions for unique applications
-
Global Shipping – Reliable delivery worldwide
-
Competitive Pricing – Direct factory pricing without middlemen
Frequently Asked Questions
Q: Can KCB55 handle shampoo with 4,000 cP viscosity?
A: At standard speed, the KCB55 handles up to 2,000 cP. However, with speed reduction via VFD, it can effectively pump fluids up to 4,000 cP. Please confirm your actual viscosity for a final recommendation.
Q: Is 304 stainless steel necessary for shampoo?
A: Yes. Shampoo contains surfactants and fragrances that can corrode cast iron. 304 stainless steel offers superior corrosion resistance and hygiene, making it the preferred choice for cosmetic applications.
Q: How do I determine the right motor power?
A: Our engineering team will calculate required torque and power based on your viscosity, flow rate, and pressure requirements. A 1.5kW motor is typically sufficient for flow rates up to 1,600 L/H at moderate pressures.
Q: What is the lead time for a customized KCB55 pump?
A: Standard pumps are available within 5-7 days. Custom configurations (stainless steel, special motors, voltage customization) typically require 10-15 working days.
Get a Fast Quote Today
Are you looking for a reliable gear pump for shampoo, cosmetics, or other high-viscosity fluids? CIXIFM provides professional technical support and customized solutions tailored to your exact requirements.
Contact CIXIFM Instrumentation for professional pump sizing and selection:
-
Visit our website for product details
-
Submit your pump specification for a custom quote
-
Call our sales team for immediate assistance
Welcome to CIXIFM Instrumentation – your trusted partner for precision metering pumps and industrial fluid handling solutions.
Last:没有了 Next:Reliable Hydraulic Oil Pumps










