sales@gninstruments.com

Location -> News

News

Industrial Sewage Pump System

Project Requirements

The customer required an industrial submersible sewage pump system for wastewater transfer, with automatic level control and standby pump operation.

Key specifications included:

  • Flow rate: 20 m³/h

  • Head: 30 m

  • Motor power: 4 kW

  • Power supply: AC 400 V, 3-phase, 50 Hz

  • Pump material: Cast iron

  • Discharge outlet: DN65

  • Protection rating: IP68 for the pump

Proposed Pump and Control Solution

The proposed pump model was 65WQ20-30-4, featuring a cast iron pump body and impeller, a DN65 discharge outlet, and a 4 kW motor.

The system was designed around two pumps sharing one control cabinet per set. The customer required four sets, corresponding to eight pumps and four control cabinets.

The proposed control arrangement included:

  • Automatic start: The duty pump starts when the liquid reaches the high-level switch.

  • Low-level stop: The pump stops when the liquid falls to the specified low-level switch.

  • Standby operation: If the duty pump fails, the standby pump should take over according to the configured control logic.

  • Control cabinet: A proposed duty-and-standby control cabinet with a 4 kW variable frequency drive (VFD), subject to confirmation of the final electrical design.

Important Engineering Checks

Before finalizing the system, the pump performance curve must be checked against the required 20 m³/h flow rate and 30 m head. The engineer should also confirm the wastewater characteristics, solids-handling requirements, level-switch arrangement, and whether the proposed VFD configuration supports the required standby switching logic.

Need a Similar Wastewater Pump System?

We can help eva luate your flow rate, head, wastewater conditions, power supply, and automatic control requirements to recommend a suitable pump configuration.

Contact Winny for model selection and pricing.

Website: https://www.gninstruments.com/english/
Email: sales01@cxflowmeter.com
WhatsApp: +86 18049841995

Last:How to Improve PVA Solution Tra.. Next:How to Select a Water Flow Mete..

Contact Us

Office Address: Room 402, No. 650, Xinzhuan Rd., Jiuting Town, Songjiang District, Shanghai, China (Mainland)

Phone:021-57635022

E-mail:info@gnflowmeter.com

E-mail:sales@gninstruments.com

关闭