Location -> Products -> Pressure -> Pressure Transmitter
Type：CX-PT-3051L flange level transmitter
Illustrate：The level transmitter choose f type level transmitter choose the solid transmitter and low pressure cast aluminium alloy body cast . It can measure all kinds of level range and density for different shape of medium container in high accuracy . It can choose many kinds of filled liquid and it cam meet different situation requests .
CX-PT-3051L Flange Level Transmitter
Description:
Characteristic:
1 、The full series products has unit construe and strong interchangeability.
2、High accuracy , good stability ,range and zero exterior continuity is adjustable .
3、No mechanical movable parts , less maintain .
4、The material of contact part is selected .
5、It adopted the H alloy jacket sensor , it accomplished the excellent cold and hot stability .
Parameter:
Standard
|
1151/ 3051L |
Flange level transmitter outline | ||||||||||
| code | Range | ||||||||||
| 3 | 0-1.3～7.5KPa | ||||||||||
| 4 | 0-4-40KPa | ||||||||||
| 5 | 0-40～200KPa | ||||||||||
| 6 | 0-0.16KPa～1MPa | ||||||||||
| code | Output | ||||||||||
| E | 4-20mA | ||||||||||
| S | Intelligent HART protocol | ||||||||||
| code | Diameter mm |
Insertion length mm |
High pressure diaphragm material |
||||||||
| A0 | 3〞80 | flat | 316LSST | ||||||||
| A2 | 3〞80 | 50 | 316LSST | ||||||||
| A4 | 3〞80 | 100 | 316LSST | ||||||||
| A6 | 3〞80 | 150 | 316LSST | ||||||||
| B0 | 4〞100 | flat | 316LSST | ||||||||
| B2 | 4〞100 | 50 | 316LSST | ||||||||
| B4 | 4〞100 | 100 | 316LSST | ||||||||
| B6 | 4〞100 | 150 | 316LSST | ||||||||
| C0 | 3〞80 | flat | HA C-276 | ||||||||
| C2 | 3〞80 | 50 | HA C-276 | ||||||||
| C4 | 3〞80 | 100 | HA C-276 | ||||||||
| C6 | 3〞80 | 150 | HA C-276 | ||||||||
| D0 | 4〞100 | flat | HA C-276 | ||||||||
| D2 | 4〞100 | 50 | HA C-276 | ||||||||
| D4 | 4〞100 | 100 | HA C-276 | ||||||||
| D6 | 4〞100 | 150 | HA C-276 | ||||||||
| E0 | 3〞80 | flat | TA | ||||||||
| F0 | 4〞100 | flat | TA | ||||||||
| code | Flange mounted | ||||||||||
| A | 3〞150lb | ||||||||||
| B | 4〞150lb | ||||||||||
| C | 3〞300lb | ||||||||||
| D | 4〞300lb | ||||||||||
| code | Structure material | ||||||||||
| flange&connect |
Exhaust valve |
Diaphragn | Filled liquid | ||||||||
| 22 | SS 316 | SS 316 | SS 316 | Silicone oil | |||||||
| 23 | SS 316 | SS 316 | Ha C | ||||||||
| 24 | SS 316 | SS 316 | Monel | ||||||||
| 25 | SS 316 | SS 316 | TA | ||||||||
| 33 | Ha C | Ha C | Ha C | ||||||||
| 35 | Ha C | Ha C | TA | ||||||||
| code | option | ||||||||||
| M1 | 0-100% linearity indicator | ||||||||||
| M3 | 3-digit LCD display | ||||||||||
| M4 | Intelligent display | ||||||||||
| B1 | Tube bending bracket | ||||||||||
| B2 | Board-mounted curved bracket | ||||||||||
| B3 | Tube flat bracket | ||||||||||
| D1 |
The upper of the side of the vent valve in the pressure chamber |
||||||||||
| D2 |
The lower of the side of the vent valve in the pressure chamber |
||||||||||
| 1/2NPT fitting | |||||||||||
| C2 |
T-connector M20 × 1.5，Rear end of weldingФ14 Impulse piping ball cone connector |
||||||||||
| d | Explosion suppression type d ⅡBT4 | ||||||||||
| i | The security explosion iaⅡCT6 | ||||||||||
Last：CX-PT-3351 remote flange type d.. Next：CX-PT-3051 single flange pressu..
